Product specifications

PERIPHERALS
Sharp Electronics Corporation
PLU Programming
Follow the procedure outlined below to assign the Scale status toa PLU/UPC.
Procedure
Enter the PGM2-Mode by turning the MA key counter clock wise to the PGM2 position
① Press [MODE]
② Select [6 PGM2 MODE]
③ Select [02 SETTING]
④ Select [01 ARTICLE]
⑤ Select [02 PLU/UPC]
⑥ Select the desired PLU from the PLU list
⑦ Go to the SCALE option and select “INHIBIT”/”ENABLE”/”COMPULSORY” by toggling
the setting with the [.] decimal key or by depressing [SBTL] and making the desired
setting.
Assignment Method:
A PLU may be preset as Scale: “Inhibited”/”Enabled”/”COMPULSORY”.
Please consider the general rules listed below when using this feature:
• A setting of “COMPULSORY” allows scalable registration without the depression of
the [SCALE] key prior to the entry.
• The Fast Food multiplication sequence must be disabled in SRV Job#906-C.
Page 106 of 246