Product specifications

SYSTEM PRESETS
Sharp Electronics Corporation
The Master Reset Operation will begin and is finalized upon ‘’3’’ audible beeps.
The SRV-mode Main Menu will appear:
Master Reset-2 Procedure:
① Set the reset switch to “OFF” position.
② While holding down the JOURNAL FEED key, and the RECEIPT FEED key, turn the
reset switch to the “ON” position.
③ At the PASSWORD screen, enter the secret key operation above.
④ Enter the serial number.
⑤ Key position assignment.
⑥ Enter the keys on the key board [0]- [9], [00], [000] [.] [CL], [@/FOR], [SBTL],
[MODE] [UP], [DOWN], [LEFT], [RIGHT], [HOME], [CANCEL] [ENTER], [CA/AT].
⑦ Push the key on the keyboard to be assigned. With this, the function key of the key
number displayed is assigned to that key position.
⑧ When relocating the keyboard, the PGM 1/2 mode uses the standard key layout.
NOTE: After the execution of the MRS-2, only the RECEIPT FEED and JOURNAL
FEED keys remain effective on the key assignment. Any key can be assigned to
any key position on the main keyboard.
Master Reset-3 Procedure:
① Set the reset switch to “OFF” position.
② While holding down the JOURNAL FEED key, and the key located directly below it,
turn the reset switch to the “ON” position.
③ At the PASSWORD screen, enter the secret key operation above.
④ Enter the serial number.
⑤ Key position assignment.
⑥ Enter the keys on the key board [0]- [9], [00], [000] [.] [CL], [@/FOR], [SBTL],
[MODE] [UP], [DOWN], [LEFT], [RIGHT], [HOME], [CANCEL] [ENTER], [CA/AT].
⑦ Push the key on the keyboard to be assigned. With this, the function key of the key
number displayed is assigned to that key position.
⑧ When relocating the keyboard, the PGM 1/2 mode uses the standard key layout.
The Master Reset Operation will begin and is finalized upon ‘’3’’ audible beeps.
NOTE: After the execution of the MRS-3, only the RECEIPT FEED and JOURNAL
FEED keys remain effective on the key assignment. Any key can be assigned to any
key position
Page 10 of 246