Owner's Manual

— 126 —
Article Programming
Use the following procedure to select any option included in the article programming group.
Procedure
1. In the SETTING window, select “01 ARTICLE.”
” The ARTICLE window will appear.
2. Select any option from the following options list:
1 DEPARTMENT: Departments
2PLU/UPC: PLUs/UPCs
3 DYNAMIC UPC: Dynamic UPC
4 PLU RANGE: A range of PLUs
5 PLU STOCK: PLU/UPC stock quantity
6 LINK PLU TABLE: Link PLU table
7 CONDIMENT TABLE: Condiment table
8 MIX&MATCH: Mix & match table
9 COMBO MEAL: Combo meal table
10 SCALE TABLE: Scale table
11 UPC NON-PLU: UPC non-PLU type code format
12 UPC DELETE: UPC record delete period
The following illustration shows the article programming option groups.
1 ARTICLE
1 DEPARTMENT See Department on page 127.
2 PLU/UPC See PLU/UPC on page 129.
3 DYNAMIC UPC See Dynamic UPC on page 132.
4 PLU RANGE See PLU range on page 132.
5 PLU STOCK See PLU/UPC stock on page 133.
6 LINK PLU TABLE See Link PLU table on page 134.
7 CONDIMENT TABLE See Condiment table on page 135.
8 MIX&MATCH See Mix & Match table on page 137.
9 COMBO MEAL See Combo meal table on page 138.
10 SCALE TABLE See Scale table on page 139.
11 UPC NON-PLU See UPC Non-PLU code format on page 140.
12 UPC DELETE See UPC delete on page 141.
(CANCEL) (ENTER)
PAGE
DOWN
PAGE
UP