Service manual

CHAPTER 6 DISASSEMBLY AND ASSEMBLY

• This chapter describes the procedure for disassembling the printer.

It is advisable to reinstall the printer in the reverse order from

disassembly, referring to "Cautions to be taken when installing."

• Some easy steps have been omitted.

• Only part names are described without indicating their part codes.

For the part codes, refer to the Parts Guide.

[Cautions to be taken when working on the printer]

1) The parts which need to be greased are indicated in "Cautions to

be taken when reinstalling." Whenever such a part is replaced

with a new one, grease it before installing.

Lubrication interval (rough guide)

• Every 6 months

• Every 2 years or 2,000,000 lines of printing

• Parts code of lubricant

Lubricant type PARTS CODE PRICE RANK

G36 00BB703600001 AU

2) Use caution not to cause the gear to become chipped or deformed

when removing or reinstalling.

3) Do not touch directly the printing head.

4) Be sure to wear an earth band to ground your body.

1 REMOVE THE CUTTER 58 and

H-COVER 58

Fig. 1

[PARTS LIST]

No. PARTS NAME Q’ty

CUTTER 58

H-COVER 58

SCREW (M2 8)

CAUTION LABEL

[DISASSEMBLY METHOD]

1) Remove the CUTTER 58 and H-COVER 58 :

Using a Phillips screwdriver, remove the three SCREWs

Remove the CUTTER 58

and H-COVER 58 .

The H-COVER 58

carries the "CAUTION" lebel .