Service manual

How to exit the program.
You can exit the program by pressing the ENTER key when the
final test pattern is shown on the screen or by pressing the CAN-
CEL key during checking.
5)-2. Pole Display Check
Checking
The screen shows the following test patterns in the order given
below. Press the ENTER key to move to the next pattern.
i. The following test patterns are displayed.
ii. The test pattern where all digits are turned ON is displayed.
Display
How to exit the program.
You can return to the Diag. submenu by pressing the ENTER key
after the 2nd test pattern where all digits are turned ON and are
displayed. Or press the CANCEL key to erase the screen to exit
the program.
5)-3. Popup Display Check
Checking
The screen shows the following test patterns in the order given
below. Press ENTER to move to the next pattern.
i. The following test patterns are displayed.
ii. The test pattern where all digits are turned ON is displayed.
Display
How to exit the program
You can return to the Diag. submenu by pressing the ENTER key
after the 2nd test pattern where all digits are turned ON and are
displayed. Or press the CANCEL key to erase the screen to exit
the program.
5)-4. PRINTER Check
Checking
The printer prints on the RECEIPT/JOURNAL PRINTER.
Display
JOURNAL/RECEIPT print
How to exit the program
One second after printing is completed, the screen returns to the
PRINTER Check of the DISPLAY & PRINTER MENU.
5)-5. PRINTER CG Check
Checking
The printer prints the built-in CG onto the RECEIPT/JOURNAL
PRINTER.
For standard characters are printed in 16 characters/line and ex-
tended ASCII characters (enlarged characters) are printed in 8
characters/line.
Standard characters are printed first, followed by the extended
ASCII characters.
Check the outputted print to see if CG is correctly printed.
Display
How to exit the program.
Press the CANCEL key to exit the program after 1 cycle of printing
is completed.
DOT DISPLAY
7SEG DISPLAY
:
:
0123456789;AaBbC
0. 1. 2. 3. 4. 5. 6. 7. 8. 9. -.
POLE Display Check
7 SEG DISPLAY : 0. 1. 2. 3. 4. 5. 6.
POPUP Display Check
PRINTER Check
UP-600/700 DIAGNOSTICS V1.0A
30 digits are
printed
Enlargement
Enlargement
30 digits are
printed
30 digits are
printed
30 digits are
printed
30 digits are
printed
PRINTER CG Check