Instruction manual
Table Of Contents
- TABLE OF CONTENTS
- Introduction
- 1 Inline Operation
- 1. Message display
- 2. Open store operation (PGM2 mode) — master and satellite
- 3. Close store operation (PGM2 mode) — master and satellite
- 4. Sign-on operation (server assignment) (REG mode/MGR mode)
- 5. Server sign-on report
- 6. Sign-off operation (cancellation of server assignment) (REG mode/MGR mode)
- 7. Look-up and updating of the GLU/PBLU file
- 8. PLU/UPC stock control
- 9. PLU/UPC data control
- 10. Price change function
- 11. Customer data control
- 12. T-LOG polling
- 13. Communication with a remote printer (optional)
- 14. Rerouting print data
- 2 Consolidated and Individual Reports
- 3 IRC Programming
- 1. Setting the machine numbers — master and satellite
- 2. Setting the terminal numbers (IRC machine numbers) — master and satellite
- 3. Creating/updating the master list — master
- 4. Specifying whether to enable or disable the system retry function when a transmission error occurs — master and satellite
- 5. Specifying the terminal to serve as a back-up master — master
- 6. Choosing whether to search the master or satellite first for the PLU/UPC code — satellite
- 7. Reading the contents of the IRC programming — master and satellite
- 8. Downloading the contents of the IRC programming to satellites — master
- 9. Programming for the remote printer
- (1) Assigning kitchen printer numbers to remote printers — master and satellite
- (2) Assigning the second kitchen printer number to each remote printer — master and satellite
- (3) Naming the remote printer — master and satellite
- (4) Specifying whether to enable or disable the function for data transmission to the remote printer — master and satellite
- (5) Specifying the format of remote printing — master and satellite
- (6) Specifying the format of chit printing — master and satellite
- 10. Reading the contents of the remote printer programming — master and satellite
- 11. Downloading the contents of the remote printer programming to satellites — master
- 12. Programming for the Manager Work Station (MWS) — master and satellite
- 13. Reading the contents of the Manager Work Station (MWS) programming — master and satellite
- 4 System Back-Up
- 5 Error Recovery
- 1. Data clear operation
- (1) Data clearing of the T-LOG buffer — master and satellite
- (2) Data clearing of the capture data — master and satellite
- (3) Data clearing of the transaction memory — master and satellite
- (4) Data clearing of the hourly sales data memory — master and satellite
- (5) Data clearing of the daily net sales data memory — master and satellite
- (6) Data clearing of the server sign-on state — master
- (7) Data clearing of the GLU/PBLU data in use — master
- 2. System retry function
- 1. Data clear operation
- BASIC SPECIFICATIONS
55
(2) Data clearing of the capture data — master and satellite
Clearing procedure
After selecting “DATA CLEAR” from the PGM2 mode menu with the same procedure as
steps 1 and 2 in “(1) Data clearing of the T-LOG buffer,” select “CAPTURE DATA”.
(3) Data clearing of the transaction memory — master and satellite
You can clear the transaction memory in the event there is some trouble and the terminal’s
memory requires clearing.
This function is available at the master and satellites.
Clearing procedure
After selecting “DATA CLEAR” from the PGM2 mode menu with the same procedure as
steps 1 and 2 in “(1) Data clearing of the T-LOG buffer,” select “TRANSACTION.”
(4) Data clearing of the hourly sales data memory — master and satellite
You can clear the hourly sales data memory in the event there is some trouble and the
terminal’s memory requires clearing. This function is available at the master and satellites.
Clearing procedure
After selecting “DATA CLEAR” from the PGM2 mode menu with the same procedure as
steps 1 and 2 in “(1) Data clearing of the T-LOG buffer,” select “HOURLY.”
(5) Data clearing of the daily net sales data memory — master and satellite
You can clear the daily net sales data memory in the event there is some trouble and the
terminal’s memory requires clearing. This function is available at the master and satellites.
Clearing procedure
After selecting “DATA CLEAR” from the PGM2 mode
menu with the same procedure as steps 1 and 2 in “(1)
Data clearing of the T-LOG buffer,” select “DAILY NET.”