Instruction manual
Table Of Contents
- TABLE OF CONTENTS
- Introduction
- 1 Inline Operation
- 1. Message display
- 2. Open store operation (PGM2 mode) — master and satellite
- 3. Close store operation (PGM2 mode) — master and satellite
- 4. Sign-on operation (server assignment) (REG mode/MGR mode)
- 5. Server sign-on report
- 6. Sign-off operation (cancellation of server assignment) (REG mode/MGR mode)
- 7. Look-up and updating of the GLU/PBLU file
- 8. PLU/UPC stock control
- 9. PLU/UPC data control
- 10. Price change function
- 11. Customer data control
- 12. T-LOG polling
- 13. Communication with a remote printer (optional)
- 14. Rerouting print data
- 2 Consolidated and Individual Reports
- 3 IRC Programming
- 1. Setting the machine numbers — master and satellite
- 2. Setting the terminal numbers (IRC machine numbers) — master and satellite
- 3. Creating/updating the master list — master
- 4. Specifying whether to enable or disable the system retry function when a transmission error occurs — master and satellite
- 5. Specifying the terminal to serve as a back-up master — master
- 6. Choosing whether to search the master or satellite first for the PLU/UPC code — satellite
- 7. Reading the contents of the IRC programming — master and satellite
- 8. Downloading the contents of the IRC programming to satellites — master
- 9. Programming for the remote printer
- (1) Assigning kitchen printer numbers to remote printers — master and satellite
- (2) Assigning the second kitchen printer number to each remote printer — master and satellite
- (3) Naming the remote printer — master and satellite
- (4) Specifying whether to enable or disable the function for data transmission to the remote printer — master and satellite
- (5) Specifying the format of remote printing — master and satellite
- (6) Specifying the format of chit printing — master and satellite
- 10. Reading the contents of the remote printer programming — master and satellite
- 11. Downloading the contents of the remote printer programming to satellites — master
- 12. Programming for the Manager Work Station (MWS) — master and satellite
- 13. Reading the contents of the Manager Work Station (MWS) programming — master and satellite
- 4 System Back-Up
- 5 Error Recovery
- 1. Data clear operation
- (1) Data clearing of the T-LOG buffer — master and satellite
- (2) Data clearing of the capture data — master and satellite
- (3) Data clearing of the transaction memory — master and satellite
- (4) Data clearing of the hourly sales data memory — master and satellite
- (5) Data clearing of the daily net sales data memory — master and satellite
- (6) Data clearing of the server sign-on state — master
- (7) Data clearing of the GLU/PBLU data in use — master
- 2. System retry function
- 1. Data clear operation
- BASIC SPECIFICATIONS
44
12. Programming for the Manager Work Station (MWS)
— master and satellite
The INLINE interface for the UP-600/UP-700 POS enables the UP-600/UP-700 to perform in-
line communications to a host P.C. through the connection to a Manager Work Station (MWS).
The function of Manager Work Station:
1) Down load of the terminal data [Terminal PC]
2) Up load of the terminal data [Terminal PC]
3) Remote Job Entry (RJE) function [Terminal PC]
4) T-Log function [Terminal PC]
5) Message function [Terminal PC]
(1) Programming of the terminal number
The terminal number of MWS can be specified by the following procedure:
1.
Turn the mode switch to the PGM2 position.
2.
Select “MWS SETTING” and press the [ENTER] key.
The MWS SETTING window will appear.
3.
Enter the terminal number (1 - 254) of MWS and press
the [ENTER] key.