Instruction manual
Table Of Contents
- TABLE OF CONTENTS
- Introduction
- 1 Inline Operation
- 1. Message display
- 2. Open store operation (PGM2 mode) — master and satellite
- 3. Close store operation (PGM2 mode) — master and satellite
- 4. Sign-on operation (server assignment) (REG mode/MGR mode)
- 5. Server sign-on report
- 6. Sign-off operation (cancellation of server assignment) (REG mode/MGR mode)
- 7. Look-up and updating of the GLU/PBLU file
- 8. PLU/UPC stock control
- 9. PLU/UPC data control
- 10. Price change function
- 11. Customer data control
- 12. T-LOG polling
- 13. Communication with a remote printer (optional)
- 14. Rerouting print data
- 2 Consolidated and Individual Reports
- 3 IRC Programming
- 1. Setting the machine numbers — master and satellite
- 2. Setting the terminal numbers (IRC machine numbers) — master and satellite
- 3. Creating/updating the master list — master
- 4. Specifying whether to enable or disable the system retry function when a transmission error occurs — master and satellite
- 5. Specifying the terminal to serve as a back-up master — master
- 6. Choosing whether to search the master or satellite first for the PLU/UPC code — satellite
- 7. Reading the contents of the IRC programming — master and satellite
- 8. Downloading the contents of the IRC programming to satellites — master
- 9. Programming for the remote printer
- (1) Assigning kitchen printer numbers to remote printers — master and satellite
- (2) Assigning the second kitchen printer number to each remote printer — master and satellite
- (3) Naming the remote printer — master and satellite
- (4) Specifying whether to enable or disable the function for data transmission to the remote printer — master and satellite
- (5) Specifying the format of remote printing — master and satellite
- (6) Specifying the format of chit printing — master and satellite
- 10. Reading the contents of the remote printer programming — master and satellite
- 11. Downloading the contents of the remote printer programming to satellites — master
- 12. Programming for the Manager Work Station (MWS) — master and satellite
- 13. Reading the contents of the Manager Work Station (MWS) programming — master and satellite
- 4 System Back-Up
- 5 Error Recovery
- 1. Data clear operation
- (1) Data clearing of the T-LOG buffer — master and satellite
- (2) Data clearing of the capture data — master and satellite
- (3) Data clearing of the transaction memory — master and satellite
- (4) Data clearing of the hourly sales data memory — master and satellite
- (5) Data clearing of the daily net sales data memory — master and satellite
- (6) Data clearing of the server sign-on state — master
- (7) Data clearing of the GLU/PBLU data in use — master
- 2. System retry function
- 1. Data clear operation
- BASIC SPECIFICATIONS
40
(4) Specifying whether to enable or disable the function for data
transmission to the remote printer — master and satellite
If a remote printer is disconnected from the IRC system or any other problem occurs, you
can disable your machine to stop data transmission to the remote printer. This prevents the
error message from appearing on the machine display each time an entry to be transmitted
to that printer is made.
Move the cursor to the “DATA PRINT” line and select “ON
KP”, “ON CHIT”, or “NOTHING” with the [ • ] key (toggle
key) or display the choices by pressing the [SBTL] key.
(5) Specifying the format of remote printing — master and satellite
With the following procedure, you can specify what items are to be printed on the remote
printer.
1.
Move the cursor to the following printing format
options and select PRINT or SKIP with the [ • ] key
(toggle key) or display them by pressing the [SBTL]
key.
Printing when quantity is one: PRINT/SKIP
PLU/department code: PRINT/SKIP
Unit price PRINT/SKIP
Amount: PRINT/SKIP
The default setting for these items is SKIP.
2.
Press the [CA/AT] key to finish the programming for
the remote printer. The CHIT FORMAT window will
open.
(For programming the CHIT FORMAT, see the next
paragraph.)