Instruction manual
Table Of Contents
- TABLE OF CONTENTS
- Introduction
- 1 Inline Operation
- 1. Message display
- 2. Open store operation (PGM2 mode) — master and satellite
- 3. Close store operation (PGM2 mode) — master and satellite
- 4. Sign-on operation (server assignment) (REG mode/MGR mode)
- 5. Server sign-on report
- 6. Sign-off operation (cancellation of server assignment) (REG mode/MGR mode)
- 7. Look-up and updating of the GLU/PBLU file
- 8. PLU/UPC stock control
- 9. PLU/UPC data control
- 10. Price change function
- 11. Customer data control
- 12. T-LOG polling
- 13. Communication with a remote printer (optional)
- 14. Rerouting print data
- 2 Consolidated and Individual Reports
- 3 IRC Programming
- 1. Setting the machine numbers — master and satellite
- 2. Setting the terminal numbers (IRC machine numbers) — master and satellite
- 3. Creating/updating the master list — master
- 4. Specifying whether to enable or disable the system retry function when a transmission error occurs — master and satellite
- 5. Specifying the terminal to serve as a back-up master — master
- 6. Choosing whether to search the master or satellite first for the PLU/UPC code — satellite
- 7. Reading the contents of the IRC programming — master and satellite
- 8. Downloading the contents of the IRC programming to satellites — master
- 9. Programming for the remote printer
- (1) Assigning kitchen printer numbers to remote printers — master and satellite
- (2) Assigning the second kitchen printer number to each remote printer — master and satellite
- (3) Naming the remote printer — master and satellite
- (4) Specifying whether to enable or disable the function for data transmission to the remote printer — master and satellite
- (5) Specifying the format of remote printing — master and satellite
- (6) Specifying the format of chit printing — master and satellite
- 10. Reading the contents of the remote printer programming — master and satellite
- 11. Downloading the contents of the remote printer programming to satellites — master
- 12. Programming for the Manager Work Station (MWS) — master and satellite
- 13. Reading the contents of the Manager Work Station (MWS) programming — master and satellite
- 4 System Back-Up
- 5 Error Recovery
- 1. Data clear operation
- (1) Data clearing of the T-LOG buffer — master and satellite
- (2) Data clearing of the capture data — master and satellite
- (3) Data clearing of the transaction memory — master and satellite
- (4) Data clearing of the hourly sales data memory — master and satellite
- (5) Data clearing of the daily net sales data memory — master and satellite
- (6) Data clearing of the server sign-on state — master
- (7) Data clearing of the GLU/PBLU data in use — master
- 2. System retry function
- 1. Data clear operation
- BASIC SPECIFICATIONS
22
Report type Description
Operating modes
Job # Required data/Remarks
OP XZ
X1/Z1 X2/Z2
CUSTOM BY AMT Customer sales X2 1286 Customer sales range
report
(by the specified
sales range)
CHARGE Customer charge X2 1288
ACCOUNT account
NO ACCESS UPC Non-accessed X1 1105
UPC report
Non-accessed Z1 1105
UPC report
(Delete)
NO ACCESS Non-accessed X2 1287
CUSTOM customer report
Non-accessed Z2 1287
customer report
(Delete)
CUSTOMER Customer delete Z2 1298
DELETE report
STACKED REPORT Stacked report X1, Z1 1190 Stacked report 1
(X1/Z1)
1191 Stacked report 2
STACKED REPORT Stacked report X2, Z2 1290 Stacked report 1
(X2/Z2)
1291 Stacked report 2
NOTE
1: You can pick up PLU/UPC codes for issuing the report. You can pick up new PLU/
UPC codes or the codes that were picked up the last time. To pick up new codes,
select “1 NEW PICK UP”, and follow the procedure show below to pick up new
codes. To pick up the codes that were picked up last time, select “2 LAST PICK
UP”.
Follow the following procedure for picking up PLU/UPC codes.
To pick up PLU/UPC codes
that were picked up the last time
To pick up all PLU/UPC codes
To pick up another code
PLU/UPC code
(PLU code: max. 5digits)
(UPC code: max. 13digits)
Scanning UPC code
CA/AT
CA/AT
CA/AT
@
FOR
@
FOR