Instruction manual
Table Of Contents
- TABLE OF CONTENTS
- Introduction
- 1 Inline Operation
- 1. Message display
- 2. Open store operation (PGM2 mode) — master and satellite
- 3. Close store operation (PGM2 mode) — master and satellite
- 4. Sign-on operation (server assignment) (REG mode/MGR mode)
- 5. Server sign-on report
- 6. Sign-off operation (cancellation of server assignment) (REG mode/MGR mode)
- 7. Look-up and updating of the GLU/PBLU file
- 8. PLU/UPC stock control
- 9. PLU/UPC data control
- 10. Price change function
- 11. Customer data control
- 12. T-LOG polling
- 13. Communication with a remote printer (optional)
- 14. Rerouting print data
- 2 Consolidated and Individual Reports
- 3 IRC Programming
- 1. Setting the machine numbers — master and satellite
- 2. Setting the terminal numbers (IRC machine numbers) — master and satellite
- 3. Creating/updating the master list — master
- 4. Specifying whether to enable or disable the system retry function when a transmission error occurs — master and satellite
- 5. Specifying the terminal to serve as a back-up master — master
- 6. Choosing whether to search the master or satellite first for the PLU/UPC code — satellite
- 7. Reading the contents of the IRC programming — master and satellite
- 8. Downloading the contents of the IRC programming to satellites — master
- 9. Programming for the remote printer
- (1) Assigning kitchen printer numbers to remote printers — master and satellite
- (2) Assigning the second kitchen printer number to each remote printer — master and satellite
- (3) Naming the remote printer — master and satellite
- (4) Specifying whether to enable or disable the function for data transmission to the remote printer — master and satellite
- (5) Specifying the format of remote printing — master and satellite
- (6) Specifying the format of chit printing — master and satellite
- 10. Reading the contents of the remote printer programming — master and satellite
- 11. Downloading the contents of the remote printer programming to satellites — master
- 12. Programming for the Manager Work Station (MWS) — master and satellite
- 13. Reading the contents of the Manager Work Station (MWS) programming — master and satellite
- 4 System Back-Up
- 5 Error Recovery
- 1. Data clear operation
- (1) Data clearing of the T-LOG buffer — master and satellite
- (2) Data clearing of the capture data — master and satellite
- (3) Data clearing of the transaction memory — master and satellite
- (4) Data clearing of the hourly sales data memory — master and satellite
- (5) Data clearing of the daily net sales data memory — master and satellite
- (6) Data clearing of the server sign-on state — master
- (7) Data clearing of the GLU/PBLU data in use — master
- 2. System retry function
- 1. Data clear operation
- BASIC SPECIFICATIONS
21
Report type Description
Operating modes
Job # Required data/Remarks
OP XZ
X1/Z1 X2/Z2
D-UPC BY DEPT Dynamic UPC by X1, Z1 1166 Department code
associated dept.
X2, Z2 1266
TRANSACTION Transaction report X1, Z1 1130
X2, Z2 1230
CID Cash-in-drawer X1 1131 For all servers
report
X2 1231
TAX Tax report X1 1133
X2 1233
POSITIVE Positive no. check X1 1139
CHECK
ALL SERVER Full server report X1, Z1 1140
X2, Z2 1240
IND. SERVER Individual server
OP XZ
1041
report
X1, Z1 1141
X2, Z2 1241
HOURLY Hourly report X1 1160
X1, Z1 1160 For all 48 half-hours with
zero skipped
DAILY NET Daily net report X2, Z2 1270
GLU GLU report X1, Z1 1180 GLU/PBLU code.
(The range can be
specified by entering
start and end codes.)
GLU BY SERVER GLU report by X1, Z1 1181
server
CLOSED GLU Closed GLU report X1, Z1 1182 Bill no.
(The range can be
specified by entering
start and end codes.)
CL-GLU BY Closed GLU report X1, Z1 1183
SERVER by server
CUSTOMER Customer sales X2, Z2 1285 Customer code
SALES 1 report 1 (The range can be
(Only details) specified by entering
start and end codes.)
CUSTOMER Customer sales X2, Z2 1289 Customer code
SALES 2 report 2 (The range can be
(Detail/amount & specified by entering
total) start and end codes.)
Use the military time
(24-hour) system. For
example, to set 2:30 a.m.,
enter 230; and to set 2:30
p.m., enter 1430.