Instruction manual
Table Of Contents
- TABLE OF CONTENTS
- Introduction
- 1 Inline Operation
- 1. Message display
- 2. Open store operation (PGM2 mode) — master and satellite
- 3. Close store operation (PGM2 mode) — master and satellite
- 4. Sign-on operation (server assignment) (REG mode/MGR mode)
- 5. Server sign-on report
- 6. Sign-off operation (cancellation of server assignment) (REG mode/MGR mode)
- 7. Look-up and updating of the GLU/PBLU file
- 8. PLU/UPC stock control
- 9. PLU/UPC data control
- 10. Price change function
- 11. Customer data control
- 12. T-LOG polling
- 13. Communication with a remote printer (optional)
- 14. Rerouting print data
- 2 Consolidated and Individual Reports
- 3 IRC Programming
- 1. Setting the machine numbers — master and satellite
- 2. Setting the terminal numbers (IRC machine numbers) — master and satellite
- 3. Creating/updating the master list — master
- 4. Specifying whether to enable or disable the system retry function when a transmission error occurs — master and satellite
- 5. Specifying the terminal to serve as a back-up master — master
- 6. Choosing whether to search the master or satellite first for the PLU/UPC code — satellite
- 7. Reading the contents of the IRC programming — master and satellite
- 8. Downloading the contents of the IRC programming to satellites — master
- 9. Programming for the remote printer
- (1) Assigning kitchen printer numbers to remote printers — master and satellite
- (2) Assigning the second kitchen printer number to each remote printer — master and satellite
- (3) Naming the remote printer — master and satellite
- (4) Specifying whether to enable or disable the function for data transmission to the remote printer — master and satellite
- (5) Specifying the format of remote printing — master and satellite
- (6) Specifying the format of chit printing — master and satellite
- 10. Reading the contents of the remote printer programming — master and satellite
- 11. Downloading the contents of the remote printer programming to satellites — master
- 12. Programming for the Manager Work Station (MWS) — master and satellite
- 13. Reading the contents of the Manager Work Station (MWS) programming — master and satellite
- 4 System Back-Up
- 5 Error Recovery
- 1. Data clear operation
- (1) Data clearing of the T-LOG buffer — master and satellite
- (2) Data clearing of the capture data — master and satellite
- (3) Data clearing of the transaction memory — master and satellite
- (4) Data clearing of the hourly sales data memory — master and satellite
- (5) Data clearing of the daily net sales data memory — master and satellite
- (6) Data clearing of the server sign-on state — master
- (7) Data clearing of the GLU/PBLU data in use — master
- 2. System retry function
- 1. Data clear operation
- BASIC SPECIFICATIONS
12
9. PLU/UPC data control
In the IRC system, PLU/UPC sales data is centrally controlled by the master. PLU/UPC data
which is temporarily stored in the T-LOG buffer of a satellite is sent to the master by T-LOG
polling. (For further information on T-LOG polling, see page 14.)
NOTE
The learning function enables the operator at a satellite to set the unit price, associated department
and deletion/non-deletion attributes for an item whose code is undefined in the PLU/UPC file. (For
further information on the learning function, see the UP-600 or UP-700 Instruction Manual.)
If the satellite does not have a dynamic UPC file, the data on the UPC item which has been set using
the learning function is stored in the PLU/UPC main file to update the master’s file.
If the satellite has a dynamic UPC file, the data is stored in the dynamic UPC file to update the
master’s file.
The data which has been set using the learning function in the training mode at a satellite is stored in
its T-LOG buffer.
For the PLU/UPC data flow, see the following scenarios.
(1) When the master and satellites have no dynamic UPC files:
(2) When the master has a dynamic UPC file and satellites don’t:
(3) When both the master and satellites have dynamic UPC files:
PLU/UPC
main file
T-LOG
buffer
PLU/UPC
main file
Saving
Updating
Master Satellite
Registration by the
learning function
T-LOG polling/updating
PLU/UPC
main file
Dynamic
UPC file
T-LOG
buffer
PLU/UPC
main file
Saving
Updating
Master Satellite
Registration by the
learning function
T-LOG polling
Updating the
PLU/UPC main files
of satellites
Updating
PLU/UPC
main file
Dynamic
UPC file
Dynamic
UPC file
PLU/UPC
main file
T-LOG
buffer
Saving
Updating
Master Satellite
Registration by the
learning function
T-LOG polling
Updating the PLU/UPC
main files of satellites
At this time, all dynamic
UPC files in the IRC
system are cleared.
Updating