User guide

TM200 V4.1 11/06 5
Maintenance
Battery Replacement
When the low battery symbol appears on the display, replace the 9V battery:
1. Remove the rubber protective jacket that encases the meter. If this jacket is not
removed, the battery compartment cannot be accessed.
2. Remove the rear Phillips screw that secures the battery compartment.
3. Open the compartment and replace the 9V battery.
4. Secure the meter’s battery compartment and rubber jacket before using the meter.
WARNING! To avoid electrical shock, disconnect the thermocouples before removing the
battery cover.
Cleaning
Use a damp cloth with a mild detergent to periodically wipe the meter housing and display
area. Do not use abrasives or solvents to clean the meter.