Operation Manual

11-76
Using the Message Service
To call the sender
You can call the sender of an SMS or MMS message in
the “Inbox” whose address (From) is the phone number.
1 At the main menu, select in the following order:
“Messages” → “Inbox.”
2 Press a or b to highlight the message from the
sender you wish to call and press C [Options].
The “Options” menu appears.
3 Press a or b to highlight “Call sender” and
press B.
To extract the phone number from the
received message
You can call using phone number contained only in the
received SMS message.
1 At the main menu, select in the following order:
“Messages” → select “Inbox,” “Drafts” or “Sent.”
2 Press a or b to highlight the message that
contains the phone number you wish to extract
and press B.
3 Press C [Options].
The “Options” menu appears.
4 Press a or b to highlight “Extract numbers”
and press B.
Phone numbers embedded in the message appear.
5 Press C [Options].
6 Press a or b to highlight “Call” and press B.
The handset starts to call the number.
Modifying a message
You can modify an original message you made before or
after sending it if the message you wish to modify is in the
“Drafts,” “Sent” or “Outbox.”
1 At the main menu, select in the following order:
“Messages” → “Drafts,” “Sent” or “Outbox.”
2 Press a or b to highlight a message you wish
to modify.
3 Press C [Options].
The “Options” menu appears.
4 Press a or b to highlight “Edit message” and
press B.
5 Modify the message and press B.
If you select “Send via SMS/MMS” in step 6, you
can use the number to make message. If you
select “Save to Contacts,” you can save the
number in the “Contacts list.”
e_tm200_7fm.book Page 76 Tuesday, November 9, 2004 9:14 PM
Downloaded from www.Manualslib.com manuals search engine