Operation Manual

11-75
Using the Message Service
4 When you have finished reading the message,
press A [Back].
Replying and Forwarding Messages
You can reply to the sender of a received message or
forward the received message to another destination.
Also, you can modify the received message when
replying or forwarding. You can also call the sender of the
message using the phone number contained in the
message.
To reply to a message
1 After reading a message or selecting a message
in “Inbox,” press C [Options].
The “Options” menu appears.
2 Press a or b to highlight “Reply” and press B.
3 Enter your message.
For information on how to enter text, refer to
“Entering Text” on page 8-51.
4 Press B and select “Send.”
To forward a message
1 At the main menu, select in the following order:
“Messages”→ select “Inbox” or “Sent.”
2 Press a or b to highlight the message you
wish to forward.
3 Press C [Options].
The “Options” menu appears.
4 Press a or b to highlight “Forward” and press
B.
5 Enter the phone number or E-mail address of the
recipient and press B.
If you wish to select the phone number (for SMS and
MMS message) or E-mail address (for MMS and
E-mail message) in the “Contacts list,” refer to
“Searching a Name and Number in the Contacts
List” on page 9-58.
If you wish to reply to all addresses on an MMS or
E-mail message, select “Reply All” in step 3.
When you forward a message, the attached
data is also sent to the recipient. However, the
handset will not send AAC, MP3 and any data
it recognises as having copyrights.
The “Subject” field is automatically filled with
the original subject preceded by “Fw:.” The
original message cannot be changed.
e_tm200_7fm.book Page 75 Tuesday, November 9, 2004 9:14 PM
Downloaded from www.Manualslib.com manuals search engine