Operating instructions

WARNING

Inspection and cleaning of the combustion chamber with the combustion chamber

temperature sensor in position

Risk of damage to the thermocouple!

Before inspection and cleaning work in the combustion chamber:

❒ Mark the position of the thermocouple.

❒ Loosen the clamp and pull out the thermocouple.

➥ After maintenance:

❒ Carefully clean any tar or soot deposits from the thermocouple.

❒ Re-insert the thermocouple to the marked position and fix in place with the

clamp.

NOTICE

We recommend that you keep a maintenance book in accordance with ÖNORM

M7510 of the Technical Directive for Fire Prevention (TRVB)

4.2 Inspection and cleaning

For inspection and cleaning use the cleaning kit provided. The cleaning kit consists of:

▪

Chamber plate (triangular plate)

▪ Flat scraper

▪ Large brush (Ø 81 mm)

▪ Small brush (Ø 53 mm)

❒ We recommend that you also use an industrial vacuum cleaner.

Servicing

Inspection and cleaning

28 Froling GesmbH | A-4710 Grieskirchen, Industriestraße 12 | www.froeling.com