Owner's Manual

50
Specifi cations

Power management
This monitor conforms to VESA DPMS and DVI DMPM. Both your video card and computer must support
the same standard in order for the monitor’s power management function to work.
DPMS: Display Power Management Signaling
DPMS Screen
Power
consumption
Hsync Vsync
ON STATE Display 312 W Yes Yes
STANDBY
No
display
7.5 W* No No
DMPM: Digital Monitor Power Management
DMPM Screen
Power
consumption
Monitor ON Display 312 W
Active OFF No display 7.5 W*
* When AUTO INPUT CHANGE is OFF. 11.5 W
when it is ON.

DDC (plug and play)
The monitor supports the VESA DDC (Display Data Channel) standard.
DDC is a signal standard for plug and play between monitors and computers. Information about resolution
and other parameters is exchanged between the two. This function can be used if the computer supports
DDC and it has been configured to detect plug-and-play monitors.
There are several types of DDC, depending on the communication method used. This monitor supports
DDC2B.

Connecting pin assignments
DVI-D input terminal: DVI-D24 pin
Pin No. Signal Pin No. Signal
1 T.M.D.S data 2- 13 Not connected
2 T.M.D.S data 2+ 14 +5 V power
3 T.M.D.S data 2/4 shield 15 GND
4 Not connected 16 Hot plug detection
5 Not connected 17 T.M.D.S data 0-
6
DDC clock
18
T.M.D.S data 0+
7 DDC data 19 T.M.D.S data 0/5 shield
8 Not connected 20 Not connected
9 T.M.D.S data 1- 21 Not connected
10 T.M.D.S data 1+ 22 T.M.D.S clock shield
11 T.M.D.S data 1/3 shield 23 T.M.D.S clock+
12 Not connected 24 T.M.D.S clock-
RS-232C terminal: D-sub 9 pin
Pin No. Signal Pin No. Signal
1 Not connected 6 Not connected
2 Received data 7 Request to Send
3 Transmitted data 8 Clear to Send
4 Not connected 9 Not connected
5 GND
RGB/COMPONENT input terminal: mini D-sub 15 pin
Pin No. Signal Pin No. Signal
1 Video input (red) 9 +5 V power
2 Video input (green/sync on green) 10 GND
3 Video input (blue) 11 Not connected
4 Not connected 12 DDC data
5 Not connected 13 Horizontal sync signal: TTL level
6 Earth (red) 14 Vertical sync signal: TTL level
7 Earth (green/sync on green) 15 DDC clock
8 Earth (blue)