Instruction manual

Operation
Volumetric Conditions
Thermo Fisher Scientific Model 5030i SHARP Instruction Manual 3-35
SET LREC FLAG STATUS DATA:
CURRENTLY: OFF
SET TO: ON ?
©ª CHANGE VALUE SAVE
RANGE AVG DIAGS ALARM
The Communication Settings menu is used for communications control
and configuration.
In the Main Menu, choose Instrument Controls > Communication
Settings.
COMMUNICATION SETTINGS:
>SERIAL SETTINGS
INSTRUMENT ID
GESYTEC SERIAL NO
COMMUNICATION PROTOCOL
STREAMING DATA CONFIG ª
RANGE AVG DIAGS ALARM
TCP/IP SETTINGS
The Serial Setting submenu is used for serial communications control and
configuration.
In the Main Menu, choose Instrument Controls > Communication
Settings > Serial Settings.
SERIAL SETTINGS:
>BAUD RATE 9600
DATA BITS 8
PARITY NONE
STOP BITS 1
RS-232/485 SEL RS-232
RANGE AVG DIAGS ALARM
The Baud Rate screen is used to set the RS-232/RS-485 interface baud rate.
Baud rates of 1200, 2400, 4800, 9600, 19200, 38400, 57600, and 115200
are available. The analyzer’s default baud rate is set to 9600 to provide
backwards compatibility with the older C-series analyzers.
In the Main Menu, choose Instrument Controls > Communication
Settings > Serial Settings > Baud Rate.
Communication
Settings
Serial Settings
Baud Rate