Instruction manual

Operation
Volumetric Conditions
Thermo Fisher Scientific Model 5030i SHARP Instruction Manual 3-29
LREC FIELDS:
>FIELD 1 SHARP
FIELD 2 AVG SHARP
FIELD 3 FLOW VOL
FIELD 4 AMB RH
FIELD 5 BARO PRESS ª
RANGE AVG DIAGS ALARM
The Choose Field Data submenu displays a list of the types of data that can
be logged for the current field. Choices are Concentrations, Other
Measurements, and Analog Inputs (if the I/O expansion board is installed).
● In the Main Menu, choose Instrument Controls > Datalogging
Settings > Select Content > Field 1–32.
DATA IN SREC FIELD 1:
>CONCENTRATIONS
OTHER MEASUREMENTS
ANALOG INPUTS
RANGE AVG DIAGS ALARM
The Concentrations screen allows the user to assign one of the
concentrations to the selected record field. The currently selected item is
shown by “<--” after it. Note that at this point, pressing indicates
that these are proposed changes as opposed to implemented changes. To
change the selected record format and erase record log file data, see
“Commit Content” below. The display shows the current heater for the
mode selected (PM).
● In the Main Menu, choose Instrument Controls > Datalogging
Settings > Select Content > select Field > Concentrations.
CONCENTRATIONS:
>NONE
PM <--
AVG PM
NEPH
SHARP
RANGE AVG DIAGS ALARM
AVG SHARP
AVG NEPH
Choose Field Data
Concentrations