Instruction manual

Operation
Instrument Controls Menu
Thermo Fisher Scientific Model 5030i SHARP Instruction Manual 3-19
INSTRUMENT CONTROLS:
>SET FLOW/PUMP
SET HEATER
FILTER TAPE CONTROL
VOLUMETRIC CONDITIONS
DATALOGGING SETTINGS ª
RANGE AVG DIAGS ALARM
COMMUNICATION SETTINGS
I/O CONFIGURATION
SCREEN CONTRAST
SERVICE MODE
DATE/TIME
TIMEZONE
The Set Flow/Pump menu allows the user to manually adjust the flow
values, and to change the operating state of the pump to ON or OFF.
● In the Main Menu, choose Instrument Controls > Set Flow/Pump.
FLOW/PUMP:
>FLOW 16.67
PUMP ON
RANGE AVG DIAGS ALARM
The Flow screen is used to view and adjust the flow.
● In the Main Menu, choose Instrument Controls > Set Flow/Pump >
Flow.
FLOW:
CURRENTLY: 16.67 LPM
SET TO: 16.67 LPM?
©ª INC/DEC
 SAVE VALUE
RANGE AVG DIAGS ALARM
The Pump screen allows the user to toggle the pump to either ON or OFF.
● In the Main Menu, choose Instrument Controls > Set Flow/Pump >
Pump.
Set Flow/Pump
Flow
Pump