Instruction manual

Operation
Range Menu
3-12 Model 5030i SHARP Instruction Manual Thermo Fisher Scientific
The analog outputs are arranged on the rear panel connector as shown in
Figure 3–4. See Table 3–3 for channels and pin connections.
Figure 3–4. Pin-Out of Rear Panel Connector
Table 3–3. Default Analog Outputs
Channel Connector Pin I/O Terminal Pin Description
1 14 1 PM
2 33 3 Neph
3 15 5 Flow
4 34 7 Ambient Temperature
5 17 9 Flow Temperature
6 36 11 Ambient Relative
Humidity
Ground 16, 18, 19, 35, 37 2, 4, 6, 8, 10, 12 Signal Ground
Note All channels are user definable. If any customization has been made
to the analog output configuration, the default selections may not apply. ▲
The Set Custom Ranges menu lists three custom ranges, which are user-
defined. In the mg/m
3
mode, any value between 0.1 mg/m
3
and 10.00
mg/m
3
can be specified as a range. In the μg/m
3
mode, any value between
100 μg/m
3
and 10000 μg/m
3
can be specified as a range.
Set Custom Ranges