Instruction manual

Thermo Fisher Scientific Model 5030i SHARP Instruction Manual i
About This Manual
This manual provides information about installing, operating, maintaining,
and servicing the Model 5030i Synchronized Hybrid Ambient Real-time
Particulate (SHARP) Monitor. It also contains important alerts to ensure
safe operation and prevent equipment damage. The manual is organized
into the following chapters and appendices to provide direct access to
specific operation and service information.
● Chapter 1 “Introduction” provides an overview of product features,
describes the principle of operation, and lists the specifications.
● Chapter 2 “Installation” describes how to unpack, setup, and startup
the instrument.
● Chapter 3 “Operation” describes the front panel display screens, the
front panel pushbuttons, and the menu-driven firmware.
● Chapter 4 “Calibration” provides the procedures for calibrating the
analyzer and describes the required equipment.
● Chapter 5 “Preventive Maintenance” provides maintenance
procedures to ensure reliable and consistent instrument operation.
● Chapter 6 “Troubleshooting” presents guidelines for diagnosing
analyzer failures, isolating faults, and includes recommended actions
for restoring proper operation.
● Chapter 7 “Servicing” presents safety alerts for technicians working
on the analyzer, step-by-step instructions for repairing and replacing
components, and a replacement parts list. It also includes contact
information for product support and technical information.
● Chapter 8 “System Description” describes the function and location
of the system components, provides an overview of the firmware
structure, and includes a description of the system electronics and
input/output connections.
● Chapter 9 “Optional Equipment” describes the optional equipment
that can be used with this analyzer.
● Chapter 10 “Model 5014i to 5030i Upgrade Procedures” describes
the 5014i to 5030i upgrade procedures.
● Appendix A “Warranty” is a copy of the warranty statement.