Instruction manual

C-Link Protocol Commands
Datalogging
Thermo Fisher Scientific Model 5030i SHARP Instruction Manual B-29
The format is defined within the command (in the case of erxy) by the
current settings of the "format" and "erec format" commands (in the case
of erec). For details on erec formatting, see the “Record Layout Definition”
section at the end of this appendix. For details on how to decode the flag
fields within these records, see the "flags" command.
Send: erec
Receive: erec
07:53 05-04-09 flags 110000 PM 0.000 1 24Hr Avg PM
0.000 1 Coef A 1.000 Bkg A 0.000 Range A 10000.000 Flow
A 0.000 6 5 3 1 1 1 0 Temp Threshold A 30.000 Temp
Threshold A 35.000
list lrec
list srec
list stream
list sp
These commands report the list of current selections for lrec logging data,
srec logging data, streaming data output, or the scratch pad (sp) list.
The scratch pad is a temporary memory area which is used to set up lists of
selections for lrec, srec, or streaming data items. The user can copy any of
these lists to the scratch pad, modify individual elements in the list, then
save the scratch pad back to the original list. Refer to the “sp field”
command for information on how to edit the scratch pad.
The following example shows the list for streaming data output.
Send: list stream
Receive: list stream
field index variable
X x time
lrec
srec
lrec rec num
srec rec num
lrxy rec num
srxy rec num
lrec aa:bb oo-pp-qq yy
srec aa:bb oo-pp-qq yy
rec = The starting record index number (1=most recent)
num = The number of records to return (1 to 10)
x = | 0 | 1 | : Reply termination format (see “set format format”
command)
y = | 0 | 1 | 2 | : Output format (see “set lrec/srec format format”
command)
aa = hours (01 to 23)