Instruction manual

Introduction
Principle of Operation
1-2 Model 5030i SHARP Instruction Manual Thermo Fisher Scientific
● Diaphragm Vacuum Pump
● External Ambient T/RH Sensor Assembly
● Internal Data Recording Unit and External Communication Ports
● Optional 6-Foot Sample Extension Tubes
● Optional Tripod Support
● Optional Roof Flange Kit
The Model 5030i combines proven technology, easy to use menu-driven
firmware, and advanced diagnostics to offer unsurpassed flexibility and
reliability. The Model 5030i has the following features:
● 320 x 240 pixels graphics display
● Menu-driven firmware
● Field programmable ranges
● Multiple user-defined analog outputs
● Analog input options
● Linearity through all ranges
● User-selectable digital input/output capabilities
● Standard communications features include RS-232/485 and Ethernet
● C-Link, MODBUS, Geysitech (Bayern-Hessen), ESM Protocol,
streaming data, and NTP (Network Time Protocol) protocols.
Simultaneous connections from different locations over Ethernet.
● Radon gas activity measurement (Rn-222; noble gas) and mass
refinement
● Flexible data storage configurations
● Volumetric air flow rate control with actual standard conditions
concentration data output
● Processor controlled calibration of all sensors
● 880 nm near forward scattering nephelometer
● Beta Detector Life ~10 years
● C-14 activity below USA authorized limit values; shipped as non-
hazardous material under Code UN2911; easy handling of the source
and instrument. No license is needed in most countries.