Instruction manual

Servicing
Service Locations
7-2 Model 5030i SHARP Instruction Manual Thermo Fisher Scientific
● “Pressure Board Calibration” on page 7-20
● “Analog Output Testing” on page 7-21
● “Analog Output Calibration” on page 7-24
● “Analog Input Calibration” on page 7-25
● “Themistor Replacement” on page 7-26
● “I/O Expansion Board (Optional) Replacement” on page 7-27
● “Digital Output Board Replacement” on page 7-29
● “Motherboard Replacement” on page 7-30
● “Measurement Interface Board Replacement” on page 7-31
● “Photo Interrupt Board Replacement” on page 7-32
● “Proportional Valve Replacement” on page 7-33
● “Detector Assembly Replacement” on page 7-34
● “Flow RTD Replacement” on page 7-36
● “Transformer Replacement” on page 7-37
● “Radius Tube Replacement” on page 7-38
● “Ambient RH/Temperature Replacement” on page 7-39
● “Front Panel Board Replacement” on page 7-41
● “LCD Module Replacement” on page 7-42
● “Removing the SHARP Optics Cover” on page 7-44
● “External Solenoid Valve Replacement” on page 7-45
● “SHARP RH/Temp Sensor Replacement” on page 7-46
● “SHARP Interface Board Replacement” on page 7-47
● “Delrin Nut Replacement” on page 7-49
● “Internal SHARP Cable Assembly Replacement” on page 7-51
● “Case Cable Replacement” on page 7-52
● “External Zeroing Filter” on page 7-53
● “Service Locations” on page 7-54