Instruction manual

Thermo Fisher Scientific Model 5030i SHARP Instruction Manual 5-1
Chapter 5
Preventive Maintenance
This chapter describes the periodic maintenance procedures that should be
performed on the instrument to ensure proper operation. Since usage and
environmental conditions vary greatly, you should inspect the components
frequently until an appropriate maintenance schedule is determined.
This chapter includes the following preventive maintenance information:
Safety Precautions” on page 5-1
Replacement Parts” on page 5-2
Cleaning the Outside Case” on page 5-2
Cleaning the Inlets” on page 5-2
Fan Filter Inspection and Cleaning” on page 5-5
Pump Rebuilding” on page 5-6
Leak Test” on page 5-6
Filter Tape Replacement” on page 5-7
Greasing the Cam” on page 5-8
External Pump Exhaust Filter” on page 5-8
Cleaning the SHARP Optics Assembly” on page 5-10
Read the safety precautions before beginning any procedures in this
chapter.
WARNING If the equipment is operated in a manner not specified by the
manufacturer, the protection provided by the equipment may be
impaired.
Equipment Damage Some internal components can be damaged by small
amounts of static electricity. A properly grounded antistatic wrist strap
must be worn while handling any internal component. For more
information about appropriate safety precautions, see the “Servicing
chapter.
Safety
Precautions