Instruction manual

Operation
Diagnostics Menu
Thermo Fisher Scientific Model 5030i SHARP Instruction Manual 3-65
operation upon exiting this screen. The following example shows the screen
when all analog outputs are set to “normal” operating mode.
● In the Main Menu, choose Diagnostics > Test Analog Outputs >
ALL, Voltage Channel 1–6, or Current Channel 1–6.
SET ANALOG OUTPUTS:
SETTING: ALL
OUTPUT SET TO: NORMAL
© SET TO FULL SCALE
ª SET TO ZERO
§ RESET TO NORMAL
RANGE AVG DIAGS ALARM
The Instrument Configuration screen displays information on the
hardware configuration of the instrument.
Note If the analyzer is in service mode, pressing will toggle the
selected item between yes and no. ▲
● In the Main Menu, choose Diagnostics > Instrument
Configuration.
INSTRUMENT CONFIGURATION:
>I/O EXPANSION BOARD YES
DETECTOR SHARP
§¨ CHANGE VALUE  SAVE
RANGE AVG DIAGS ALARM
The Contact Information screen displays the customer service information.
● In the Main Menu, choose Diagnostics > Contact Information.
CONTACT INFORMATION:
CALL CENTER: 508-520-0430
http://WWW.THERMO.COM/AQI
RANGE AVG DIAGS ALARM
Instrument Configuration
Contact Information