Instruction manual

Operation
Diagnostics Menu
3-60 Model 5030i SHARP Instruction Manual Thermo Fisher Scientific
INTERFACE BOARD VOLTAGES:
3.3 SUPPLY 3.3 V
5.0 SUPPLY 5.0 V
15.0 SUPPLY 15.0 V
24.0 SUPPLY 24.0 V
-15.0 SUPPLY -15.0 V
RANGE AVG DIAGS ALARM
The I/O Board screen (read only) is used to display the voltage readings on
the I/O expansion board. This menu is only displayed if the I/O expansion
board option is installed.
● In the Main Menu, choose Diagnostics > Voltages > I/O Board.
I/O BOARD VOLTAGES:
3.3 SUPPLY 3.3 V
5.0 SUPPLY 5.0 V
24.0 SUPPLY 24.0 V
-3.3 SUPPLY -3.3 V
RANGE AVG DIAGS ALARM
The Detector Board screen (read only) is used to display the voltage
readings on the measurement interface board.
● In the Main Menu, choose Diagnostics > Voltages > Detector Board.
DETECTOR BOARD:
5.0 SUPPLY 5.0 V
RANGE AVG DIAGS ALARM
The Nehpelometer Board screen (read only) is used to display the voltage
readings on the nephelometer board.
● In the Main Menu, choose Diagnostics > Voltages > Nephelometer
Board.
I/O Board Voltages
Detector Board Voltages
Nephelometer Board
Voltages