Instruction manual

Operation

Volumetric Conditions

Thermo Fisher Scientific Model 5030i SHARP Instruction Manual 3-51

Output Zero (0)% Value Full-Scale 100% Value

External Alarms 0 7,000

Neph Temp User-set alarm min value User-set alarm max value

Neph RH User-set alarm min value User-set alarm max value

Neph IRED User-set alarm min value User-set alarm max value

Neph Ref 350 2000

Beta Ref 0 65,000

Mass Comp 0 100

The Choose Signal to Output screen displays a list of the analog output

signal choices. Choices are grouped into three categories: Concentrations,

Other Measurements, and Analog Inputs (if the I/O expansion board

option is installed). This allows the user to select the output signal that will

be assigned to each analog channel. The Concentrations screen is shown

below. See Table 3–5 for a list of items for each signal group choice.

● In the Main Menu, choose Instrument Controls > I/O Configuration

> Analog Output Config > select Channel > Choose Signal to

Output.

CHOOSE SIGNAL TYPE:

>CONCENTRATIONS

OTHER MEASUREMENTS

ANALOG INPUTS

RANGE AVG DIAGS ALARM

CHOOSE SIGNAL - CONC

SELECTED OUTPUT: V1

CURRENTLY: PM

SET TO: NONE ?

RANGE AVG DIAGS ALARM

Table 3–5. Signal Type Group Choices

Concentrations Other Measurements Analog Inputs

None None None

PM Barometer Pressure Analog Input 1 (if the I/O expansion

Choose Signal to Output