Instruction manual

Operation

Volumetric Conditions

Thermo Fisher Scientific Model 5030i SHARP Instruction Manual 3-39

Choices are Concentrations, Other Measurements, and Analog Inputs (if

the I/O expansion board option is installed).

● In the Main Menu, choose Instrument Controls > Communication

Settings > Streaming Data Config.

STREAMING DATA CONFIG

>INTERVAL 10 SEC

ADD LABELS NO

PREPEND TIMESTAMP YES

ADD FLAGS YES

ITEM 1 PM ª

RANGE AVG DIAGS ALARM

The Streaming Data Interval screen is used to adjust how frequently a new

record will be generated. The following interval times are available: 1, 2, 5,

10, 20, 30, 60, 90, 120, 180, 240, and 300 seconds.

● In the Main Menu, choose Instrument Controls > Communication

Settings > Streaming Data Config > Interval.

STREAMING DATA INTERVAL:

CURRENTLY: 10 SEC

SET TO: 20 SEC ?

 SAVE VALUE

RANGE AVG DIAGS ALARM

Note Add Labels, Prepend Timestamp, and Add Flags are toggle items that

change between yes or no when selected. ▲

The Choose Stream Data screen displays a list of the types of data that can

be sent via streaming data. Choices are Concentrations, Other

Measurements, and Analog Inputs (if the I/O expansion board is installed).

● In the Main Menu, choose Instrument Controls > Communication

Settings > Streaming Data Config > Item 1–8.

Streaming Data Interval

Choose Stream Data