User guide

142 Connectivity
Infrared
In order to use the Infrared function, you need to search for
other infrared enabled devices to establish contact with your
phone. Keep your phone within a distance of 20 centimetres
before searching. The infrared setting will return to off when no
data is transmitted/received via infrared communication.
Turning On or Off
“Connectivity”
→ “Infrared” → “Switch On/Off”
1. Select “On(3 min)” or “Off”.
The infrared setting is activated, and “ ” is displayed.
Sending All Data
“Connectivity”
→ “Infrared” → “Send All”
1. Enter your handset code.
For details on the handset code, see “Change Handset
Code” on page 123.
2. Select the desired data to send.
3. Enter the authorisation code.
Mass Storage
You can set the phone to connect to a PC via Mass Storage
mode.
“Connectivity”
→ “Mass Storage”
1. Select “Yes”.
Note
• Activating Mass Storage mode also activates offline mode.
• Mass Storage is not available when the battery is low, a
Java™ application is paused, music player is active, or a
memory card is not inserted in your phone.
USB Charge
You can set the phone to charge via USB, connected to a PC.
“Connectivity”
→ “USB Charge”
1. Select “Enable” or “Disable”.
(M 12-2)
(M 12-2-1)
(M 12-2-2)
(M 12-3)
(M 12-4)