User guide

Entering Characters 37
Using Stroke Mode (Traditional)
The following is an example of entering “ ”.
1. Change the input mode to T9
Stroke mode.
2. Press IGJ to display
the corresponding stroke for
“”.
3. Long press the corresponding key
to complete the selection (in this
case, M).
Note
• Each Traditional/Simplified Chinese mode has own T9
Stroke mode. The screen examples in steps 1 to 3 are
displayed when you select “Traditional Chinese” in the Input
Language option.
Using PinYin Mode
The following is an example of entering “ ”.
1. Press K for the first letter of the reading, then
highlight “l”.
Long press the
corresponding numeric key
to select the desired
character directly from the
Candidate field.
Candidate field
Input field