Manual

E11
E
E
E
CONTROL PANEL
TO CHANGE CLOCK TIME:
1 Turn oven on.
2 Touch Clock/Timer pad twice until the clock indicator light
blinks.
3 Touch the – and + pads to enter new time.
4 After 5 seconds, the clock indicator light will stop blinking,
indicating the current clock time is accepted.
5 Unless oven is about to be used, turn oven off.
SETTING TIMER
1 Turn the appliance on by touching the ON/OFF pad.
2 Touch Clock/Timer pad and hold it until the
timer indication light blinks and 0:00 shows
on display.
3 Touch the – and + pads to enter time in increments of minutes.
4 When the time has elapsed, an audible signal will sound for 2
minutes. Touch any pad to turn the audible signal off.
TOUCHPAD SOUND
TO TURN OFF TOUCHPAD SOUND:
1 Turn the appliance off by touching the ON/OFF pad.
2 Touch and hold the – pad rst, then the + pad for 2 seconds
simultaneously until a tone sounds. The touchpad sound is
now off.
TO TURN ON TOUCHPAD SOUND:
1 Turn the appliance off by touching the ON/OFF pad.
2 Touch and hold the – pad rst, then the + pad for 2 seconds
simultaneously until a tone sounds. The touchpad sound is
now on.
SELECTING AN OVEN FUNCTION
1 Turn the oven on by touching the ON/OFF pad.
The symbol to the right indicates the oven is now
on and the function may be selected.
2 Touch the and pads to scroll through available cooking
modes and make selection.
3 The selected mode’s default temperature will display.
The oven will accept the default temperature after 5 seconds
if no modication is made.
4 Touch the – or + pads to decrease or increase the temperature
if desired.
The oven will begin preheating after temperature is selected.
Temperature may be adjusted once preheating has started by
using the – or + pads.
See Oven Modes section on pages 15–16 for more information
on available cooking modes.
CHANGING THE OVEN TEMPERATURE
The oven temperature is measured and displayed in degrees
Fahrenheit.
The cooking temperature may be changed before or during
preheating and cooking cycles.
Touch and hold the – and + pads to decrease or increase
temperature in increments of 25°F. Once new temperature is
selected, the display will momentarily turn off while temperature
is being adjusted and will illuminate again in 10 seconds with
new temperature displayed.
LIGHT
The oven light will remain on once an oven function has started.
The oven light will automatically turn off 10 minutes after the
end of a cooking cycle.
THERMOMETER SYMBOL
REGULAR PREHEAT:
During regular preheat, the thermometer
symbol will indicate the oven’s heating
progress as the bottom segment illuminates
until the top segment is illuminated.
When all three segments are lit, the preheat-
ing cycle has completed. Place food inside of the oven.
Note: There is no audible tone signaling the end of the preheat-
ing cycle.
QUICK PREHEAT:
During Quick Preheat, the three segments
of the thermometer will ash in sequential
order. When the Quick Preheating cycle has
completed, the 3 segments will stop ashing
and remain lit.
After the Quick Preheat cycle has completed, an audible tone
will sound, indicating the oven is ready for food to be placed
inside.
QUICK PREHEAT
Quick Preheat can be used to reduce the amount of time the
oven needs to preheat by approximately 40%.
IMPORTANT: Do not place food inside of the oven until Quick
Preheat has completed and the oven countdown begins.
1 Turn the oven on by touching the ON/OFF pad.
2 Touch the and pads to scroll through available cooking
modes and make selection.
3 The selected mode's default temperature will display. The
oven will accept the default temperature after 5 seconds if
no modication is made.
4 Touch the – or + pads to decrease or increase the temperature
if desired.
5 Touch the Preheat pad to start Quick Preheat.
DELAY START
TO SET DELAY START
1 Select an oven function and touch the – or + pad to select a
temperature.
2 Touch the Clock/Timer pad and hold until the Cook Time
symbol ashes.
3 Touch the – or + pad to set the desired cooking time.
4 Touch the Clock/Timer pad again until the End Cooking
Time symbol ashes.
5 Touch the – or + pad to set the time the cooking sequence
should end.
6 The oven will be on standby until the calculated time is
met. The symbols for End Time and Cook Time will
illuminate once the Delay Start has started.
7 When the time has elapsed, an audible signal will sound for
2 minutes.
0:00 is displayed and the End Time and Cook
Time symbols blink.
8 Touch any pad on the control panel to turn the audible signal
off.
FAVORITE
Use the Favorite function to save a frequently used cooking
setting.
SAVING A NEW FAVORITE SETTING:
1 Set the oven cook function and temperature as previously
instructed and, if necessary, set the Delay Start function.
2 Immediately touch and hold the Favorite pad for 2 seconds
until a tone sounds. The settings are now saved as a Favorite.
Note: A Favorite must be saved immediately after setting the
countdown parameters, as the Favorite will be saved with the
time displayed, regardless of original setting.
A new Favorite may be saved at any time by following steps
1–2 above.