Manualshelf

Installation Manual

ManualsBrandsSHARP ManualsAppliances24" Electric Single Wall Oven with 2.5 cu. ft. Capacity in Stainless Steel
12345678910
6
E
E
E
E
INSTALLATION INSTRUCTIONS
4-WIRE CONNECTION
(UNGROUNDED NEUTRAL)
4-WIRE CABLE FROM HOME POWER SUPPLY
IMPORTANT: Use the 4-wire cable from home power supply in
the U.S. where local codes do not allow grounding through neutral,
New Branch circuit installations (1996 NEC), mobile homes and
recreational vehicles, new construction and in Canada.
UNGROUNDED NEUTRAL
I
B
C
D
G
F
E
H
A
A
Junction Box
B
Black Wires
C
Red Wires
D
Cable from
Oven
E
UL listed or CSA
Approved Conduit
Connector
F
Ground (Green or
Bare) Wires
G
UL Listed Wire
Connectors
H
Neutral (White)
Wires
I
House Electrical
Supply
1.
Disconnect power before servicing.
2.
Connect the 2 black wires
B
together using a UL listed wire
connector.
3.
Connect the 2 red wires
C
together using a UL listed wire con-
nector.
4.
Connect the 2 neutral (white) wires
H
together using a UL listed
wire connector.
5.
Connect the ground (green or bare) wire
F
from the oven cable
to the ground (green or bare) wire (in the junction box) using a
UL listed wire connector.
6.
Install junction box cover.
INSTALL OVEN
WARNING
Excessive Weight Hazard
• Two or more people are necessary to move and install oven.
• Attempting to move or install oven alone can result in back
or other injury.
1.
With help, lift the oven partially into the cabinet cutout. Use the
oven opening as an area to grip.
NOTE: Push against seal area of the oven front frame when
pushing the oven into the cabinet. Do not push against the outside
edges.
2.
Push the oven completely into the cabinet until the back surface
of the front frame touches the front wall of the cabinet. Center
the oven within the cabinet cutout.
NOTE: With the oven door open, you will see two holes, one on
each side of the front frame of the oven door opening.
AA
B
A
Holes
B
Seal Area of Oven
3.
Drill
1
/8" pilot holes through the 2 holes in the front frame and
into the front wall of the cabinet.
4.
Using the 2 screws provided, install the oven to the cabinet.
Replace the oven door and racks.
5.
Reconnect power to the oven.