Instruction manual

1-20
1
Getting Started
Handset Power On/Off
Standby
1
2
3
1
Open handset
2
Press and hold g
After Power On Graphic, handset enters
Standby.
3
Turning Off
Press g for 2+ seconds
After Power Off Graphic, handset shuts down.
My Details Setup & Network Information
C When handset is turned on for the first time, setup confirmation appears after Power On Graphic.
Choose Yes or はい A Press b A Enter last name A Press b A Enter first name
A Press b
C Handset initiates Network Information retrieval when N, M or b is pressed for the first time.
Choose Yes or はい A Press b
^ Retrieve Network Information to use Network-related services. (Clock is set automatically after
retrieval.)
^ To update Network Information manually, see P.10-15 "Retrieve NW Info".
^ Unless otherwise noted, operations in this manual are described with Clock set.
Return to Standby
C Press g to return to Standby from function windows, menus, etc.
^ When a confirmation appears, choose Yes and press b. Handset returns to Standby.
Note H
^ USIM Card data is read after turning power on. Signal strength indicator may take some time
to appear. It may take longer when turning power on for the first time.
^ Insert USIM Card appears when USIM Card is not inserted (see P.1 -4 ).
^ Some functions are disabled if handset is left with power off or out-of-range for long periods.
For details, contact SoftBank Customer Centre, General Information (see P.20-29).
Tip H
Display turns off after a period of inactivity.