Instruction manual

20-9
20
Appendix
Note H
Update failure may disable handset.
Contact SoftBank Customer Centre,
Customer Assistance (see P.20-29).
Update Result
C While Information window appears,
select Update Result A Press b
B Press b again to exit.
C In Standby, press b A Select
Settings A Press b A Use F to
select Phone Settings A Select
Software Update A Press b A Select
Update Result A Press b
B Press b again to return.
Update Failure
Update Result
Scheduled Update
C Confirmation appears at scheduled
update time. Press b or wait
approximately ten seconds for update to
start.
^
Update will not start while handset is in
use. When the current operation ends,
confirmation appears. After ten minutes,
scheduled update is automatically
cancelled.
^ Update automatically cancels Keypad Lock.
Note H ^ Handset Phone Book entries, media files, and other
content are not affected by firmware updates, but users
should always back up important information (note that
some files cannot be copied). SoftBank is not liable for
damages from lost information, etc.
^ If handset does not return to Standby after update, turn
power off, reinsert battery, then restart handset.
Confirmation