Instruction manual

12-23
12
Tools
Scan text (URLs, mail addresses, phone numbers or roman
letters) with mobile camera.
^ Scan up to 256 characters continuously.
^ Scan up to 60 single-byte characters within 3 lines. Scanning
over 35 characters at one time may yield poor results.
^ Some symbols may not be read.
^ Text mode is set to Auto each time Text Scanner is activated.
Change the mode if text is distorted in Auto (such as white
text in black background).
^ Zoom is not available.
1
Frame text on Display
^ Adjust to frame text in [ ]. Letters at the
ends may be distorted.
^ Slide Portrait/Macro Selector according
to text size.
^ Hold handset approximately 10 cm away
from barcode.
C Use F to adjust brightness.
C To switch text mode, press N x A
Select Reversed Text A Press b A
Select Auto, Normal or Reversed A
Press b
C To open Help (Key Assignments), press 0.
B Press b to return.
2
Press b
Text Scanner reads the text.
C Press i to stop scan A Start over
from Step 1
3
Use E to select a line and press b
^ Text Scanner reads one line per scan.
Incoming Calls while Creating QR Code
C Contents are temporarily saved. End the call to return.
Text Scanner
Note H ^ Text Scanner will not activate if music is playing; when
Stop music? appears, choose Yes and press b to
proceed.
^
Text Scanner will not activate if an S! Application is active.
Main Menu H Too ls A Tools 3 (F) A Barcode A Scan Text
Focus Adjustment
Bar (Better focus in
darker blue)