Flush Mount Installation Instructions

E 2
Shelf detail showing the deflector vent installed.
Shelf detail showing the deflector vent during installation.
Position deflector vent and mark holes. Pre drill using a
1
/16" (1.57 mm) bit before mounting.
C
Front view
No oven
B
A
Suggested electrical
outlet location
Anti-Tip block
3
/4" (19.05 mm)
shelf
Side view
1
3
/4" (44.45 mm)
front face of shelf
Front face of cabinet
16
7
/8"
(428.62 mm)
flush opening
height
Move oven location
downward for extended
countertops for better
viewing angle.
Anti-Tip
block
3. Place the drawer adjacent to the wall or cabinet opening. Plug
the power supply cord into the electrical outlet.
4. Carefully guide the drawer into the prepared opening. Avoid
contact with the sides of the cutout opening and also pinching
the cord between the oven and the wall.
 

 

Figure 3A
Figure 4
Figure 3B
 
7. Secure the drawer with the 4 screws supplied.
Mounting
flange
Figure 2B
Figure 2C
 
 


 