Spec Sheet

SMC1585BS Convection Microwave Oven with the RK-94S30 Trim Kit
INCLUDES DUCTS, FINISH TRIM STRIPS AND EASYTO
FOLLOW INSTRUCTIONS
SNAPIN, OUTER FRAME & MOUNTING FRAME
STYLISH INTEGRATED APPEARANCE
STANDARD MOUNTING
MODEL UPC
DESCRIPTION
(Stainless steel-look)
PRODUCT DIMENSIONS
SHIPPING DIMS
SHIPPING
WEIGHT
(LBS)
FRAME
DIMENSIONS
CUTOUT DIMENSIONS
A B C D E
RK49S27 074000620445
27" Built-in Trim Kit for the
SMC1842CS and SMC1843CM
18-
15/32"
26-7/8"
14 1/2" to
15 3/4"
24-11/16" to 25-
5/16"
Min 20" 33.9" X 24.1" X 4.7" 21.0
RK49S30 074000620438
30" Built-in Trim Kit for the
SMC1842CS and SMC1843CM
18-
15/32"
29-7/8"
14 1/2" to
15 3/4"
24-13/16" to
26-3/4"
Min 20" 33.9" X 24.1" X 4.7" 22.5
When building in a Sharp counter top microwave oven, be sure to use the proper Sharp built-in kit. All Sharp
kits are UL approved and provide ductwork to assure proper air circulation around the product. Never enclose
a microwave oven so tightly that air cannot circulate around it. It will not function properly in a tight enclosure.
Prepare the cabinet or wall opening to provide access to a separate 3-pronged, 120V AC outlet of 15 amps or
larger. Not all microwave ovens can be built-in. Check the nameplate and or carton of the microwave oven for
the correct built-in kit. Please refer to operation manual for installation recommendations. This information is also
available at www.SharpUSA.com/trimkits.
© 2017 Sharp Electronics Corporation. All rights reserved.
Sharp, Carousel and all related trademarks are trademarks or registered trademarks of
Sharp Corporation and/or its aliated companies. All other trademarks are property of their
respective owners.
Product specications and design are subject to change without notice.
SHARP ELECTRONICS CORPORATION
100 Paragon Drive, Montvale NJ, 07645
1.800.BE.SHARP • www.sharpusa.com
4-5-2017 v1
Microwave Oven
Built-In Trim Kits