Product Specification Sheet for SMC1585BS

© 2021 Sharp Electronics Corporation. All rights reserved.
Product specication and design are subject to change without notice.
SHARP ELECTRONICS OF CANADA LTD.
335 Britannia Road East, MISSISSAUGA, ONTARIO, L4Z 1W9
www.sharp.ca
MICROWAVE OVEN
BUILT-IN TRIM KIT
STAINLESS STEEL
SNAP-IN OUTER FRAME & MOUNTING FRAME
CAN BE USED FOR BOTH STANDARD OR FLUSH
MOUNT INSTALLATION
DESIGNED FOR SHARP
®
COUNTERTOP AND
CONVECTION MICROWAVE OVENS
STYLISH DESIGN AND A STAINLESS STEEL FINISH
CREATES A SEAMLESS, BUILT-IN APPEARANCE
INCLUDES DUCTING, FINISH TRIM, AND
EASY-TO-FOLLOW INSTRUCTIONS
B
E
C
A
D
SMC1585BS
When building-in a Sharp
®
Countertop Microwave Oven, be sure to use the proper Sharp built-in kit. All Sharp kits are cUL
®
approved and provide ductwork to assure proper air circulation around the product. Never enclose a microwave oven so
tightly that air cannot circulate around it. It will not function properly in a tight enclosure. Prepare the cabinet or wall opening
to provide access to a separate 3-pronged, 120V AC outlet of 15 amps or greater. Not all microwave ovens can be built-in.
Check the nameplate located on the inside of the microwave oven for the correct built-in kit. Always refer to the installation
guide for recommendations.
MODEL UPC DESIGNED FOR WIDTH
RK94S27F 074000621084 SMC1585BS 27”
RK94S30F 074000621091 SMC1585BS 30”
MODEL
FRAME DIMENSIONS STANDARD CUTOUT DIMENSIONS
A (HEIGHT) B (WIDTH) C (HEIGHT) D (WIDTH) E (MIN. DEPTH)
RK94S27F 20” 26 - 7/8” 18 - 1/2” 25 - 1/4” 20-1/8”
RK94S30F 20” 29 - 7/8” 18 - 1/2” 25 - 1/4” 20-1/8”
MODEL
FRAME DIMENSIONS FLUSH CUTOUT DIMENSIONS
A (HEIGHT) B (WIDTH) C (HEIGHT) D (WIDTH) E (MIN. DEPTH)
RK94S27F 20” 26 - 7/8” 22 - 7/16” 27 - 1/8” 20-1/8”
RK94S30F 20” 29 - 7/8” 22 - 7/16” 30 - 1/8” 20-1/8”