Instruction Manual

8
To start operation
1
Press the select key and select Energy saving icon.
2
Press the key. [ : ON, : OFF ]
3
Press the key.
Energy Saving
Use this feature when you want to switch the appliance to energy-saving operation.
To cancel operation
It is the same method as starting operation.
Press the key in step 2.
NOTE
While this feature is operating, the inside temperature of the •
refrigerator and freezer compartment will be higher than the
preset temperature as follows ; R: about 1°C, F: about 2°C.
(If the preset temperature is set at R: 3°C, F: -18°C.)
The displayed temperature will not be changed.
The efciency of power saving depends on the usage •
environment (controlling temperature, ambient temperature,
frequency of opening or closing the door, amount of food).
Cancel this feature when you feel the beverages are not •
cooled enough or ice making takes time.
Flashing
Tips for saving energy
Keep the ventilation space as much as ■
possible around the refrigerator.
Keep your refrigerator out of direct sunlight, ■
and do not place next to heat generating
appliance.
Open your refrigerator door as briey as ■
possible.
Hot foods should be cooled before storing. ■
Place the food evenly on the shelves to allow ■
the cooling air to circulate efciently.
The amount of power consumption of this model is measured
according to the international standard of the refrigerator
performance.
If the refrigerator is operated with these
accessories[Ice cube maker, Ice cube box]
taken out, it works under the most energy-
efcient condition.
The amount of power consumption of this •
model is measured with these accessories
taken out as indicated on the right gure.
The amount of power consumption •
of this model is measured under the
space dimensions on the right gure.
300 mm300 mm
90 mm
60 mm
(B504)-W.indb 8 2013/11/01 12:26:13