User Manual

ManualsBrandsSHARP ManualsRefrigeratorSJ-16V/18V

Thank you very much for buying this SHARP product.

Before using your SHARP refrigerator, please read this

operation manual to ensure that you gain the maximum

benefit from it.

REFRIGERATOR - FREEZER

OPERATION MANUAL

EFR 250

CONTENTS

•WARNING ............................................. 2

• CAUTION .............................................. 3

• DESCRIPTION ..................................... 4

• INSTALLATION .................................... 5

•

HOW TO REVERSE THE REFRIGERATOR

COMPARTMENT DOOR .........................

• OPERATION ......................................... 8

•STORING FOOD .................................. 9

• CARE AND CLEANING ..................... 10

•WHAT TO DO BEFORE YOU CALL

FOR SERVICE .................................... 11

SJ-16V

SJ-18V

Summary of content (12 pages)

PAGE 1
SJ-16V SJ-18V EFR 250 REFRIGERATOR - FREEZER OPERATION MANUAL CONTENTS • WARNING ............................................. 2 • CAUTION .............................................. 3 • DESCRIPTION ..................................... 4 • INSTALLATION .................................... 5 • HOW TO REVERSE THE REFRIGERATOR COMPARTMENT DOOR ......................... 6 • OPERATION ......................................... 8 • STORING FOOD .................................. 9 • CARE AND CLEANING ........
PAGE 2
WARNING 1. This refrigerator contains flammable refrigerant (R600a: isobutane) and insulation blowing gas (cyclopentane). Observe the following rules to prevent ignition and explosion. • The refrigeration system behind and inside the refrigerator contains refrigerant. Do not allow any sharp objects to come into contact with the refrigeration system. • Do not use mechanical devices or other means to accelerate the defrosting process. (This refrigerator has adopted automatic defrosting system.
PAGE 3
CAUTION 1. Do not touch the compressor unit or its peripheral parts, as they become extremely hot during operation and the metal edges may cause injury. 2. If the power supply is accidentally disconnected, please wait for at least 6 minutes before re-connecting the power, as back pressure in the compressor may trip the overload relay. 3. Avoid removing food from the freezer with your bare hands. Directly touching products stored at sub-zero temperatures can result in frostbite. 4.
PAGE 4
DESCRIPTION 9 10 9 10 1 2 11 12 1 11 2 12 3 5 3 4 13 13 6 7 7 14 15 8 8 16 SJ-16V 1. Bottle shelf 2. Refrigerator temp. control knob 3. Freezer temp. control knob 4. Free case (Only for SJ-16V) 5. Shelf (Only for SJ-18V) 6. Fresh case (Only for SJ-18V) 7. Evaporating pan 8. Adjustable foot 9. Table top Do not place hot objects on Table top. The table may melt and deform. The table can resist temperatures up to 100°C. 4 SJ-18V 10. Cover 11. Light 12. Door pocket 13. Bottle pocket 14.
PAGE 5
INSTALLATION 6cm 30cm 6cm 6cm 104 cm 1. To ensure adequate ventilation for your refrigerator, it is recommended to provide space of 6cm on both sides and at the back, and space of 9cm above the refrigerator. Insufficient spacing will decrease the cooling efficiency, resulting in unnecessary consumption of electricity. 87 cm 2. Using the front Adjustable foot, ensure that the refrigerator is positioned firmly and level on the floor. Adjustable foot 3.
PAGE 6
HOW TO REVERSE THE REFRIGERATOR COMPARTMENT DOOR The refrigerator compartment door can be changed to a left-opening door. Prepare a slotted screwdriver. 8 2,9 3 5 1 2 Preparation (1) Disconnect the power plug from the wall socket. (2) Remove all door pockets. With the refrigerator compartment door open, remove the cover. (1) While lifting the cover, push in the recesses (3 places) on the underside of the table top, and release the claws.
PAGE 7
5 Reverse the bearing and hole cover of the door. 8 • Remove the hole cover by inserting a slotted screwdriver into the recess shown in the drawing, and pushing it down. Recess • If the refrigerator compartment door is in a slanted position, you will not be able to insert the shaft (upper). Bearing Hole cover Close the refrigerator compartment door, align the holes, and insert the shaft (upper).
PAGE 8
OPERATION CONTROLLING TEMPERATURES The refrigerator controls its temperature automatically. However, if needed, adjust the temperature as follows. Refrigerator compartment REFRIGERATOR TEMP. CONTROL controls the compressor running time of the refrigeration system. 冷蔵室温度調節 (MAX) For keeping foods fresher tasting. When the refrigerator does not provide sufficient cooling. Center position For normal operation. (MIN) When the refrigerator provides excessive cooling.
PAGE 9
HINTS WHEN MAKING ICE 1. Do not over fill the Ice cube tray; otherwise the ice cubes will be joined together when frozen. 2. When the ice cubes are made, hold the Ice cube tray upside down whilst twisting either end in opposite directions, allowing the ice cubes to drop out. 水位 Water level Ice cube collecter NOTE: To prevent damage to the Slide case, do not make ice in the Ice cube collecter of the Slide case or pour oil into it.
PAGE 10
CARE AND CLEANING Some household cleaning chemicals may affect the inside surfaces and plastic shelves resulting in splitting or cracks occurring. When cleaning all plastic parts inside this refrigerator, only use diluted dishwashing liquid(soapy water). Make sure that all plastic parts are thoroughly rinsed with water after cleaning. 1. Remove the shelves and pockets from the cabinet and door. Wash them in warm soapy dishwashing water; rinse in clean water and dry. 2.
PAGE 11
WHAT TO DO BEFORE YOU CALL FOR SERVICE Before you call for service, check the following point. IT IS NORMAL for the refrigerator to produce the following sounds. • Loud noise produced by the compressor when operation starts --- Sound becomes quieter after a while. • Loud noise produced once a day by the compressor --- Operating sound produced immediately after automatic defrost operation.
PAGE 12
SHARP CORPORATION 12 Printed in China TINS-A701CBRZ 06EK CN 2