Operation Manual

3 To change the quality and resolution of your photos, press MENU and
select Photo Settings or select the Settings button.
n Resolution - Select from 2048 x 1536 (3MP), 1600 x 1200 (2MP), 1280
x 960, 800 x 600, 640 x 480.
n JPEG Quality - Select from High, Medium, Low.
n White Balance - Adjust to reflect the light source. Select from Auto,
Daylight, Cloudy, Fluorescent, and Incandescent.
n Effects - Select from Off, B/W, Sepia or Negative.
n Geotagging - Select to turn on geotagging and tag your photos with
location coordinate information.
n Turn photo tooltips on - Select to display tips.
 Larger JPEG Quality and Resolution values increase the quality of your
photo but require more storage space. The number of pictures remaining is
shown in the upper right of the screen.
4 You can change your flash or auto focus settings by using the buttons
on the left of the screen, or adjust exposure by using the D-pad left/
right.
Flash Settings - Auto Flash, On, Off
Focus Settings - Auto Focus, Macro, Infinity
5 Use the DISP button to hide or show the information on the screen.
6 By default, the photo will be saved to the Memory Card Album. To save
to your device, press MENU and select Capture to. From the submenu
select Device Album, or another album you created on the memory
card.
7 When you’re ready to take your photo, first press the right shoulder
button half-way down to focus. Once the focus box turns green, press
the button the rest of the way to capture the photo. If the focus box turns
red, release the button and try focusing again. You can also use the
trackball to select the capture photo button .
8 The photo preview appears on the display. You can:
n Press CANCEL to discard it; or,
n Press DONE to save it to the album you’ve selected. If you do
nothing, the photo will be automatically saved after a few seconds.
70 Using the Applications