Operation Manual

Device Privacy Code
If you want to secure your device from unauthorized access once your
device has gone into key guard mode, you must set up a privacy code:
1 Press JUMP to go to the Jump screen. Press MENU then select
Settings > Key Guard & Security.
2 Scroll down to the Privacy Lock group box. Highlight , then
press the trackball to select it.
3 Enter a three-digit code using the keyboard or the number pop-up
menu:
At the prompt, re-enter your code to verify.
4 A “New Combination Enabled” message appears. Select OK.
5 Press DONE to save your settings and return to the Jump screen.

You can make emergency calls from the key guard screen, even if privacy
code is enabled, by opening the display then pressing MENU +JUMP .
Key Guard Mode
You can “lock” your device controls by entering key guard mode:
1 You can enter key guard mode from any screen by pressing and holding
DONE for two seconds. Or, press JUMP to go to the Jump screen.
Press MENU to open the menu, scroll to highlight Key Guard, then
press the trackball.
2 The control buttons lock and the key guard screen appears.
3 To unlock and wake the device, open the screen or press MENU +
DONE . If you have set a privacy code, type it at the prompt.

To change the image displayed while in key guard mode, see “Use
Photo for Caller ID or Key Guard Background” on page 72.
Setting Up Your Device 29