User manual

22
Before Using the Tablet
SH-05G_E_02.fm
[22/29]
1
In the home screen, [R]/[設定] (Settings)/[言
語と文字入力] (Language & input)/[言語
(Language)を選択] (Select language)/[English]
When you turn the power on for the first time, the initial
settings screen is displayed. Follow the instructions on the
screen and operate.
The following items can be set. However, items to be displayed
may differ depending on the Google account settings.
 Language setting
 Wi-Fi settings (nP. 22 “Wi-Fi settings”)
 Check software update
 Google account settings by Tap & Go
 Google account settings (nP. 24 “Setting up Google account
etc.”)
 Set up payment info
 Get your apps & data
 Owner's information of the tablet
 Google services
 Google Now setting
The confirmation screens for sending device error information
and for software update are also displayed.
■ Initial settings for docomo service
1
When the initial settings screen for docomo
service is displayed, [Agree to all]/[Start
settings]
2
Make the initial settings
: The following items can be set.
 docomo ID
 docomo cloud
 docomo apps password
 docomo location information
 Remote Initialization Service
*
 Install all apps
* This is not displayed when you have not set a docomo
apps password.
3
[Start using]
An access point (sp-mode) for Internet connection is
registered by default. You can add other access points and
change them if necessary.
For details on sp-mode, refer to the DOCOMO website.
If you want to use mopera U or Business mopera Internet, add
an access point of either provider manually.
For details on mopera U, refer to the mopera U website.
■ Checking an access point in use
1
In the home screen, [R]/[Settings]/[More]/
[Cellular networks]/[Access Point Names]
■ Setting additional access points
Never set the MCC to a figure other than 440 or the MNC to a
figure other than 10. Otherwise the added access point
disappears from the screen.
1
In the home screen, [R]/[Settings]/[More]/
[Cellular networks]/[Access Point Names]/
[m]
2
[Name]/enter the name of the network profile
to create/[OK]
3
[APN]/enter the access point name/[OK]
4
Enter other items required by network
operators/[z]/[Save]
Reset an access point to default setting.
1
In the home screen, [R]/[Settings]/[More]/
[Cellular networks]/[Access Point Names]
2
[z]/[Reset to default]
If you use Wi-Fi function of the tablet, you can use mail or
Internet by connecting to access points of your home,
corporate network or public wireless LAN service.
Packet communication is also available while [Wi-Fi] is set to On.
Wi-Fi connection is prioritized while Wi-Fi connection is set, but
the connection is automatically switched to that of LTE/3G/GPRS
network once Wi-Fi connection is terminated. Note that packet
communication charges may be incurred in this case.
Refer to the manual of your wireless LAN base unit when using
the access point at home etc.
Operate access point registration near the access point.
If you use the docomo service by using Wi-Fi function, set a
docomo ID in advance. In the home screen, [R]/[Settings]/
[docomo service/cloud]/[docomo ID設定] (Set docomo ID) to
set it.
1
In the home screen, [R]/[Settings]/[Wi-Fi]
2
Set to On
3
Select an access point
: If you select an access point protected by security, enter the
password (security key) and select [CONNECT].
Changing screen display to
English
Initial settings
Setting an access point
If the settings of MCC and MNC are changed and the added
access point disappears from the screen, reset the settings or
set the access point manually.
Resetting an access point
When sp-mode is not subscribed or if you fail to make
automatic setting of an access point due to signal status such
as outside the service area, you are required to set the access
point again manually.
Wi-Fi settings
Radio interference with Bluetooth devices
Wireless LANs (IEEE 802.11b/g/n) use the same frequency
band (2.4 GHz) as Bluetooth devices. Therefore, using the
wireless LAN device near a Bluetooth device may cause radio
interference, lowering of communication speed, noise or
connection failure. In this case, turn off the Bluetooth device or
keep the tablet and the wireless LAN device at least
approximately 10 m away from the Bluetooth device.
SH-05G_E.book 22 ページ ２０１５年７月１５日 水曜日 午後１時４５分