User manual

38
Call
SH-02J_E_04.fm
[38/43]
■ Answering a voice call by answering memo
1
When a voice call is received, the ringtone
sounds and the incoming lamp flashes
2
In the incoming voice call screen, [ ]/
[Absence Memo]
Playing an answering memo
1
In the home screen, [ ]
2
[]/[Call settings]
3
[Call/Ans Memo]
4
[Answering Memo List]
5
Select an answering memo
You can carry out operations such as using a hands-free call
and adjusting the in-call volume according to the usage
condition during a call.
1 Other party's name and phone number
2 End call
End a call.
3 Call time
4 Display of high-quality sound
Display during a call with the high-quality sound in VoLTE.
･ It is also displayed during receiving a VoLTE of the voice
call, video call, etc.
5 Dialpad
You can enter touch-tone signals.
6 Mute
Enable or disable the mute setting on a current call.
7 Speaker
You can talk with hands-free.
When a Bluetooth device is connected, you can switch audio
output ports.
8 Switch to video
Switch to a video call.
9 The other party's image
If you cannot receive the other party's image, [ ] is
displayed.
a Your own image
b Switch camera
Switch to the front camera/back camera.
■ Adjusting the in-call volume
1
1/2 during a call
■ Switching to full screen display
Switch the video call screen to the full screen display.
1
Touch the screen during a call
: To disable the full screen display: Touch the screen
■ Hold
Hold/Unhold a current voice call.
Subscription to Call Waiting Service is required to use hold.
1
[ ] during a call/[Hold]/[Cancel hold]
■ Adding a call
Place a current voice call on hold and make a call to another party.
Subscription to Call Waiting Service is required to add a call.
1
[ ] during a call/[Add call]
2
Enter a phone number/[]
: Touch the other party put on hold to switch to whom you talk.
■ Switching to voice call
Switch to a voice call during a video call.
1
[ ] during a call/[Switch to voice call]
■ Displaying dialpad
Display the dialpad during a video call.
1
[ ] during a call/[Dialpad]
■ Switching audio output port
Set whether to talk with hands-free during a video call. When a
Bluetooth device is connected, you can switch audio output ports.
1
[ ] during a call/[Switch audio output
destination]
2
Select an audio output port
■ Switching image of camera
Set whether to send your own image during a video call.
1
[ ] during a call/[Camera OFF]/[Camera ON]
■ Switching image area
Switch displaying area of the other party's/your own image during a
video call.
1
[ ] during a call/[Switch video area]
Operation during a call
Voice call screen
Video call screen
Note the followings to use hands-free or video call.
･ Speak approximately 20 to 40 cm away from the mouthpiece.
When the surroundings are noisy, the sound may break up
and the call may not be satisfactory.
･ When calling outdoors, in a location where surroundings are
noisy or where the sound echoes loudly, use an earphone/
microphone.
･ If the sound breaks up during a hands-free call, lower the
in-call volume.
SH-02J_E.book 38 ページ ２０１６年１１月１０日 木曜日 午後４時４４分