User Manual

64
OPTIONAL EQUIPMENT
20-BIN STAPLE SORTER (SF-S56)
1
Open the stapler cover.
2
Lift the release lever and pull out the staple box.
●
Lift the release lever to unlock the staple box. Then pull out
the box.
3
Remove the empty staple cartridge from inside the
staple box.
4
Insert the new staple cartridge into the box until it
clicks in place.
●
Insert the new cartridge by aligning the arrows on the
cartridge with those on the box. Check that the cartridge locks
in place by pulling it slightly.
●
The cartridge holds 5,000 staples.
NOTE:
Be sure not to remove the rear paper and tape before inserting
the cartridge.
20-bin staple sorter (SF-S56)
Staple cartridge replacement
When the staple cartridge becomes empty, the message “ADD
STAPLES. FOLLOW INSTRUCTIONS INSIDE THE SORTER.” will
appear. Replace the staple cartridge as follows: