User Manual

18
MAKING COPIES
MARGIN SHIFT
Margin shift
3
If you want to change the shift amount and/or shift
direction, press the SCROLL DISPLAY key.
●
The following message will appear.
●
If an ERASE mode is used together with a MARGIN SHIFT
mode, a selection display for the MARGIN SHIFT and ERASE
modes will appear. Press 1 on the 10-key pad to select
MARGIN SHIFT.
●
If an optional duplex module is installed and a two-sided
copying mode is selected, the margin shift selection list for the
second side will also be displayed.
4
Select the desired shift amounts using the 10-key pad.
●
Select the margin shift amount for the front side. Then, if an
optional duplex module is installed and a two-sided copying
mode is selected, select the margin shift amount for the
second side.
The selected shift amounts will be highlighted.
●
To correct an entry error, press the SCROLL DISPLAY key.
●
The following message will appear after the selection of a
margin shift amount if shift direction change has been enabled
with key operator program P42.
MARGIN SHIFT
• SIDE 1
RIGHT 9mm
SELECT SHIFT AMOUNT WITH 10-KEY PAD.
AMOUNT PRESS
0 1
3mm 2
6mm 3
9mm 4
12mm 5
15mm 6
SCROLL DISPLAY
INFORMATION
USE 10-KEY PAD TO SELECT.
CHANGE THE DIRECTION?
MARGIN SHIFT
•SIDE 1
RIGHT 9mm
NO
YES
:PRESS 1 :PRESS 2
1
23
45
6
7
0
C
8
9
S
AUDIT CLEAR