User Manual

13
MAKING COPIES
Manual
1
Place the original face down on the document glass
and close the document cover.
2
Use the reduction ( ), enlargement ( ) and
ZOOM keys to set the desired copy ratio.
A. Preset reduction ratios are: 86%, 81%, 70%, and 50% (95%,
77%, 64%, and 50%).
B. Preset enlargement ratios are: 115%, 122%, 141%, and
200% (121%, 129%, 141%, and 200%).
C. Zoom ratios: Any ratio from 50% to 200% can be set in 1%
increments.
●
Press the reduction (
) key or enlargement ( ) key to
set the approximate ratio, then press the
key to decrease
the ratio or the
key to increase the ratio.
●
To decrease or increase the zoom ratio rapidly, press and hold
the
or key. However the value will stop at the preset
reduction or enlargement ratios. To move beyond these ratios,
release the key and then press and hold it again.
D. Same-size copying: Press the 100% key to reset the copy
ratio to 100%.
3
Ensure that the desired tray is selected.
●
If the AUTO PAPER SELECT mode is on, the appropriate copy
paper size will have been automatically selected based on the
original size and selected copy ratio.
●
If a tray of the required size is not installed, use the manual feed
tray and press the TRAY SELECT key to select the manual
feed tray.
4
Enter the desired number of copies.
5
Press the START key.
100%
E
AU
MA
PH
ZOOM
DD NUMBER
RE-COUNT
RIGINALS
LIGHT DARK
TRAY SELECT
EXPOSURE
AUTO
MANUAL
PHOTO
1 4 1 %
COPY RATIO
EXPOSURE
ORIGINAL
AUTO
AUTO PAPER
SELECT
A4
A4
1.
A3
2.
1
23
45
6
7
0
C
8
9
AUDIT CLEAR
START
REDUCTION/ENLARGEMENT/ZOOM
Reduction/Enlargement/Zoom