User Manual

8
MAKING COPIES
Normal copying
NORMAL COPYING
●
For manual copy density adjustment, press the EXPOSURE
key to select MANUAL and adjust with the LIGHT and DARK
keys as desired.
●
For photographs, select PHOTO and then adjust with the
LIGHT and DARK keys as desired.
5
Use the 10-key pad to enter the desired number of
copies.
●
The number will be shown in the copy quantity display.
●
A single copy can be made with the initial setting, i.e., when “0”
is displayed.
●
Use the clear (
) key to cancel an entry if a mistake is
made.
6
Press the START key.
●
The number in the copy quantity display will decrease by 1
each time a copy is made.
●
To cancel a copy run, press the CLEAR ALL (
) key.
Copying will stop and the number in the copy quantity display
will be reset to 0.
●
To repeat the same copy sequence for a different original,
simply replace the original and press the START key.
1 0 0 %
COPY RATIO
EXPOSURE
MANUAL
135
LIGHT DARK
1 0 0 %
COPY RATIO
EXPOSURE
PHOTO
135
LIGHT DARK
1
23
45
6
7
0
C
8
9
INFORMATION
INTERRUPT
CLEAR ALL
START
AUDIT CLEAR
CT
9
START