Service manual

2 Remove two screws C and remove the motor.

6-4. Toner density sensor

7. Operation panel section/medium

cabinet

1 Open the front cabinet.

2 Remove three screws A and two harnesses from the operation

panel.

3 Remove the operation panel unit.

4 When removing the medium cabinet, first remove the process unit

and the developer unit then remove four screws B and remove

the medium cabinet.

8. Major parts in the frame side

8-1. Ozone filter

1 Remove the document glass.

2 Remove the black sheet and remove the ozone filter.

8-2. Optical unit cooling fan removal

1 Remove the rear cabinet.

2 Remove as shown below.

6 – 14